Industrial and Maritime History (J2697.3)

Blueprint dieline copy engineering drawing on paper - Bristol Axial Engine Type RR3 showing general arrangement of side elevation. Made by Bristol Tramways & Carriage Co Ltd Motor Constructional Works,

Industrial and Maritime History (J2697.9)

Blueprint dieline copy engineering drawing on paper - Arrangement of Axial Engine Type RR4, 1936 showing general arrangement. Made by Bristol Tramways & Carriage Co Motor Constructional Works,

Industrial and Maritime History (J2697.18), Axial Engine

Blue cardboard binder titled The Bristol Tramways & Carriage Co Ltd Axial Engine. Mr Redrup's Agreement, containing 12 copy typescript pages of two legal agreements between BT&CC and Charles Redrup assigning Redrup's patents to the company, 1931 and 1932

Industrial and Maritime History (J2697.17), Bristol Axial Engine Tests

Light cardboard ribbon binder titled Bristol Axial Engine Tests Augst to November 1936, enclosing 57 typewritten sheets of test results compiled by Bristol Tramways & Carriaeg Co Motor Constructional Works

Industrial and Maritime History (J2697.8)

Blueprint dieline copy engineering drawing on paper - Engine Assemblies for the Bristol Axial engine RR3, 1933. Made by Bristol Tramways & Carriage Co Motor Constructional Works,

Industrial and Maritime History (J695.1.65)

A chisel with the cutting edge at an angle to the sides of the tool rather than square, used for slicing material and getting into recessed areas of the work. Blade only with pointed three cornered tang. Owned by J. Cooper,donor's grandfather.

Industrial and Maritime History (Lant35), About 1880

Lantern slide showing Fred Little view across Bathurst Wharf and The Grove from Bathurst Parade

Industrial and Maritime History (J695.1.96)

Chisel with square cutting end for spindle turning, grooved along the blade. The tang ends with a quarter circle shape. One of a set of eight, made byThos. Ibbotson & Co. Owned by J. Cooper, donor's grandfather.

Industrial and Maritime History (J695.1.95)

Chisel with square cutting end for spindle turning, grooved along the blade. The tang ends with a quarter circle shape. One of a set of eight, made byThos. Ibbotson & Co. Owned by J. Cooper, donor's grandfather.

Industrial and Maritime History (J695.1.97)

Chisel with square cutting end for spindle turning, grooved along the blade. The tang ends with a quarter circle shape. One of a set of eight, made byThos. Ibbotson & Co. Owned by J. Cooper, donor's grandfather.

Industrial and Maritime History (J695.1.98)

Chisel with square cutting end for spindle turning, grooved along the blade. The tang ends with a quarter circle shape. One of a set of eight, made byThos. Ibbotson & Co. Owned by J. Cooper, donor's grandfather.

Industrial and Maritime History (Lant71)

Lantern slide showing 4-masted barque outbound under tow at Bridge Valley Road. Note landing stages at Nightingale Valley.

Industrial and Maritime History (Lant75), Clifton Suspension Bridge

Lantern slide showing View of River Avon and Suspension Bridge from Cumberland Basin. Tug standing by in middle distance and paddle steamer alongside at Hotwells landing stages.

Industrial and Maritime History (Lant82)

Lantern slide showing view on Sea Mills Reach towards Horseshoe Bend. Unidentified Campbell paddle steamer outbound.

Industrial and Maritime History (OH195), Interview with Albert Clarke (Bristol architecture and post-war development)

Mini disk containing recording of interview Albert Clarke, city architect for Bristol, retired 1974. Recorded in 1999 by Kieran Costello, as part of the People and Politics project. His architect training, his work during the Bristol Blitz and his role in the post-war reconstruction of the city centre and new housing developments in Bristol. Continued on OH-196. [Oral History] See also OH196

Industrial and Maritime History (PBAN8170), Severn Bridge

Aerial view of the Severn Bridge looking towards Beachley. (C Momber 741)

Industrial and Maritime History (PBAN7930a), Severn Bridge

Ground-level shot of the Severn Bridge taken from Aust cliff, on the upstream side of the bridge. The tide is out. (C Momber 520)

Industrial and Maritime History (PBAN8288), Oldbury Power Station

Aerial view of the basin at Oldbury Power Station being dredged. (C Momber 892)

Industrial and Maritime History (PBAN8287), Oldbury Power Station

Aerial view of Oldbury Power Station. (C Momber 891)

Industrial and Maritime History (PBAN9005), Shepperdine

An old trow sits on the banks of the River Severn at Shepperdine. The building on the left is the former Windbound public house, now a care home. Oldbury Power Station and the Severn Bridge can be seen in the distance looking downstream. (C Momber 1461)

Industrial and Maritime History (OH197), Interview with Claude Draper (local government and cooperative society)

Mini disk containing recording of interview with Claude Draper, former Bristol city alderman and Cooperative Society employee. Recorded in 1999 by Kieran Costello, as part of the People and Politics project. [Oral History]

Industrial and Maritime History (Lant92)

Lantern slide showing Pill Regatta.

Industrial and Maritime History (J6021), Atlastic - A New Process Varnish

4-page printed leaflet for Atlastic - A New Process Varnish made by Henry Matthews & Co Ltd, Lewins Mead, c1935

Industrial and Maritime History (J5137.G2)

Rectangular shipping house flag. Black with white “G” motif. (Rectangle)

Industrial and Maritime History (PBAN5112)

An old postcard picture of pilot cutters moored up in Pill Creek. It shows Cardiff and Barry cutters as well as local Pill cutters. Cardiff cutters came to Rowles Boatyard for caulking of their decks and for sail repairs.

Industrial and Maritime History (PBAN5113)

Historical picture of the cutter “Bristol Pilot 4” anchored in Pill Creek. In the background is the Rowles boatyard with a hull on the slipway and Customs House. Photo provided by Emma Millicent Canby

Industrial and Maritime History (OH611), Interview with Mary Ace (Tales of the Vale)

Digital recording containing interview with Mary Ace recorded in 2017 as part of the Tales of the Vale Oral History project. Mary has lived in Avonmouth all her life [Oral History]

Industrial and Maritime History (OH613), Interview with Mike Pemberton (Tales of the Vale)

Digital recording containing interview with Mike Pemberton recorded in 2017 as part of the Tales of the Vale Oral History project. Mike has lived in Shirehampton all his life [Oral History]

Industrial and Maritime History (J5137.Misc13), Welsh Flag

Rectangular flag with halyard. Top half white, bottom half green. Red dragon design in centre. Welsh National Flag

Industrial and Maritime History (Lant4), G.W.S.S Co. Devon

Lantern slide showing print of Whitwill Line steamer SS Devon at sea.

Industrial and Maritime History (thris4833)

Thrissell works - street plan of works and surrounding houses.

Industrial and Maritime History (PBA1718)

Discharging woodpulp ex “Stalheim” overside to craft at Y Shed, City Docks. Dockers unloading bales on barge. ‘OGSL Jan 52’. Glimpse of M Shed on Princes Wharf in background.

Industrial and Maritime History (J5023.190), Billiards

Part uncut sheet of cigarette cards on the subject of Billiards.

Industrial and Maritime History (J5362), NDLB

Industrial and Maritime History (J5985)

Wooden cash till with brass fittings, made by Gledhill & Sons Ltd, Trinity Works, Halifax, and used at G. Bambury & Sons Ltd, at Phippen Street and later at Redcliffe Hill, Bristol

Industrial and Maritime History (J5986)

Men's unused new donkey jacket with SABMM printed in yellow on the reverse. Owned by Harold Wring (donor's father) who worked for St Annes Board Mills Maintenance team from 1954 until 1973

Industrial and Maritime History (J5989)

Brass and alloy Spiralarm Type S safety lamp for detecting combustible gases. Said to have been used at the Clifton Suspension Bridge, presumably for testing the gases in the arched abutment on the Leigh Woods side.

Industrial and Maritime History (039.TMH)

Wolf electric drill Type NW3c/E. Collected for display use during creation of the Maritime Heritage Centre Phase 2 displays, c1986.

Industrial and Maritime History (038.TMH)

Wolf electric drill Type NW34. Collected for display use during creation of the Maritime Heritage Centre Phase 2 displays, c1986.

Industrial and Maritime History (J5990)

Jute sack supplied and maintained on hire by West of England Sack Contractors Ltd, Bristol.